Industrial Rock Crusher Single Crushing Stage Hammer Mill Stone Equipment
Parameters of Single Stage Hammer Mill:
| Model | Rotor speed (r/min) | Feed opening size (mm) | Max feeding size (mm) | Discharghing size (mm) | Capacity (t/h) | Motor power (kw) | Weight (t) | Overall dimensions L×W×H (mm) |
| PC300 × 200 | 1500 | 100*200 | 80 | 0-10 | 2-5 | 5.5 | 0.5 | 700 × 750 × 800 |
| PC400×300 | 1500 | 145×295 | 100 | 0-30 | 5--8 | 7.5 | 0.9 | 844×942×878 |
| PC600×400 | 1000 | 295×450 | 100 | 0-35 | 10--12 | 18.5 | 1.5 | 1000×1000×1300 |
| PC600×600 | 1000 | 295×570 | 100 | 0-35 | 12--18 | 45 | 2.14 | 1315×840×1501 |
| PC800×600 | 1000 | 350×570 | 120 | 0-45 | 20-25 | 55 | 2.45 | 1515×2586×1040 |
| PC800×800 | 1000 | 350×850 | 120 | 0-45 | 35-45 | 55 | 3.05 | 1515×2831×1040 |
| PC1000×800 | 1000 | 580×580 | 200 | 0-45 | 25-40 | 110 | 6.5 | 3206×2210×1515 |
| PC1000×1000 | 1000 | 580×1060 | 200 | 0-45 | 40-80 | 132 | 7.59 | 3514×2230×1515 |
| PC 1250×800 | 750 | 650×850 | 200 | 0-45 | 20-50 | 132 | 11.7 | 2630×1780×2050 |
| PC1250×1250 | 750 | 650×1330 | 200 | 0-45 | 90-110 | 185 | 13.2 | 2630×2180×2050 |
| PC1400×1400 | 750 | 1050×1540 | 250 | 0-45 | 120-170 | 280 | 17.2 | 2790×2800×2310 |
| PC1600×1600 | 600 | 1500×1785 | 350 | 0-60 | 220-280 | 450 | 22.8 | 3350×3120×2660 |
Product Descriptions of Hammer Mill:
1. The hammer crusher crushes through the collisions between high speed hammer and materials, and the hammer crusher have good quality features like simple structure, high reduction ration, high efficiency, etc.
2. The PC hammer crusher(hammer mill) were suitable for both dry and wet crushing of brittle, medium hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
3. The hammer crusher has good quality features like simple structure, high reduction ration, high efficiency, etc.
Working Principles of PC Stone Breaker:
1. The gap of the grate in heavy hammer crusher can be adjusted for changing the discharging size to meet the different requirements of users. The main working parts of the heavy hammer crusher is rotor with hammers, the rotor consists of the main shaft, disk, pin roll, and hammer.
2. The motor makes the rotor rotate quickly in the crushing cavity, while the materials are put into the crusher and then crushed by the hammer with high speed motion, strike, impact, shear, and grind.
3. There is a sieve plate at the bottom of the rotor, the crushed materials whose size is below the mesh size will be ejected through the sieve plate, while whose size is larger than the mesh size should be continuously impacted and ground by the rotor and finally be ejected out of the heavy hammer crusher.
Working Flows:
1) Feeding: The material is loaded into the vibrating feeder by the forklift, and the gravel is evenly conveyed into the crusher by the vibrating feeder.
2) Crushing: the stone is crushed by a jaw crusher, and the impact crusher is crushed and then transferred into the vibrating screen.
3) Screening: After the sieve is sieved out of the gravel of 40mm or less, it is sent into the sand making machine, and more than 40mm is re-crushed.
4) Sand making: gravel below 40mm is broken into sand in sand making machine.
Features:
1) Wear parts are wear-resistant, impact resistant and extend equipment life
2) The chassis can be turned over and the maintenance is more convenient
3) High yield, granules account for more than 85%, meeting the requirements for use
4) The feed port is large, the crushing chamber is high, and the high hardness material can be broken.
5) Low investment cost, novel design and efficient operation
6) Double pulley rotor for increased inertia and stability of the rotor
Product Tags:
|
|
Industrial Rock Crusher Single Crushing Stage Hammer Mill Stone Equipment Images
|
